Browse from the subcategories below
MFG: VULCAN
Model No: 230941OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.49
MFG: VULCAN
Model No: 289081OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$7.43
MFG: VULCAN
Model No: 231161OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.09
MFG: VULCAN
Model No: 289401OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$9.55
MFG: VULCAN
Model No: 231321OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.43
MFG: VULCAN
Model No: 231591OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$4.26
MFG: VULCAN
Model No: 231751OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.11
MFG: VULCAN
Model No: 231911OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.46
MFG: VULCAN
Model No: 231081OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.89
MFG: VULCAN
Model No: 230351OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.60
MFG: VULCAN
Model No: 232211OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$6.35
MFG: VULCAN
Model No: 231831OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.29
MFG: VULCAN
Model No: 250381OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$6.04
MFG: VULCAN
Model No: 230861OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.31
MFG: VULCAN
Model No: 230271OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a bette grip on the chuck. Jobber length...
$2.20
MFG: VULCAN
Model No: 289241OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$8.75
MFG: VULCAN
Model No: 231241OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.29
MFG: VULCAN
Model No: 219381OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$4.53
MFG: VULCAN
Model No: 230431OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.60
MFG: VULCAN
Model No: 219701OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$5.60
MFG: VULCAN
Model No: 231671OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$4.86
MFG: VULCAN
Model No: 250031OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$4.60
MFG: VULCAN
Model No: 230781OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.31
MFG: VULCAN
Model No: 271891OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials, Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$24.65
MFG: VULCAN
Model No: 270651OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials. Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$16.70
MFG: VULCAN
Model No: 263281OR
Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic. Cuts ideally round holes without chipping or breaking the material. All sizes 3/16 in and larger have three flats on the shank for a better grip on the drill chuck...
$6.86
MFG: VULCAN
Model No: 270811OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials. Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$17.60
MFG: VULCAN
Model No: 270491OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials. Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$14.98
MFG: VULCAN
Model No: 271461OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials. Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$21.56
MFG: VULCAN
Model No: 270221OR
Steel bit with split point that eliminates the need for a center punch and keeps from skating on hard materials. Three flats on the shank for better grip on chuck. Used in applications on farms and in machine shops...
$13.66
MFG: VULCAN
Model No: 242790OR
Plastic Case Drill Bit Set includes 13 pieces, sizes: 1/16 - 1/4 in. All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$11.60
MFG: VULCAN
Model No: 871140OR
Plastic Case Drill Bit Set includes 17 pieces, sizes: 1/16 - 3/8 in. All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$21.82
MFG: VULCAN
Model No: 279281OR
Angle dimples scoop the wood to drill. Heat-treated shaft resists bending under heavy loads...
$6.35
MFG: VULCAN
Model No: 278201OR
Heat-treated shaft resists bending under heavy loads. Angle dimples scoop the wood to drill cleaner and faster than conventional spade bits...
$4.94
Out Of Stock
MFG: WESTERN STATES
Model No: 80246
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile...
$4.28
Out Of Stock
MFG: WILMAR
Model No: W9003
Wilmar Step Drill Set, Steel, Titanium Nitride-Coated, Dimensions: 5.4 in W x 7 in D x 1 in H, Number of Pieces: 3, Includes: 6 Step: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 in, 9 Step: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in, 13 Step: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 11/32, 3/8, 13/32, 7/..
$16.86