Browse from the subcategories below
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
MFG: ACORN INTERNATIONAL
Model No: BC214
Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500...
$75.50
MFG: ACORN INTERNATIONAL
Model No: BC31016
Acorn International Rod Chair Rebate, Rebar Size: 3 x 5/8 in, Number of Rebars Held: 3, Metal..
$46.75
MFG: ACORN INTERNATIONAL
Model No: BC314
Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500...
$114.64
MFG: ACORN INTERNATIONAL
Model No: BT174-5M
Acorn International Bar Tie, Wire Size: 17 ga, 4 in L, Includes: (5000) Bar Ties..
$82.65
Out Of Stock
MFG: ACORN INTERNATIONAL
Model No: BT175-1M/5M
Acorn International Bar Tie, Wire Size: 17 ga, 5 in L, Steel, Includes: 1M Bar Ties..
$18.92
MFG: ACORN INTERNATIONAL
Model No: BT175-5M
Used to secure the position of rebar during concrete pouring...
$116.80
MFG: ACORN INTERNATIONAL
Model No: BT176-1C
Used to secure the position of rebar during concrete pouring...
$4.62
MFG: ACORN INTERNATIONAL
Model No: BT176-1M/5M
Used to secure the position of rebar during concrete pouring...
$20.74
Out Of Stock
MFG: ACORN INTERNATIONAL
Model No: BT178-1M/5M
Acorn International Bar Tie, Wire Size: 17 ga, 8 in L, Steel, Includes: 1M Bar Ties..
$25.92
MFG: ACORN INTERNATIONAL
Model No: BT178-5M
Used to secure the position of rebar during concrete pouring...
$126.58
MFG: ACORN INTERNATIONAL
Model No: NSR3418
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides and more..
$7.49
MFG: ACORN INTERNATIONAL
Model No: NSR3424
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides and more...
$9.93
MFG: ACORN INTERNATIONAL
Model No: NSR3430
Acorn International Nail Stake, Point Type: Round, Steel, 30 in L, 3/4 in Dia..
$10.96
MFG: ACORN INTERNATIONAL
Model No: NSR3436
Acorn International Nail Stake, Point Type: Round, Steel, 36 in L, 3/4 in Dia..
$13.22
MFG: REBAR STAKES
Model No: PRC-26
Holds #3, #4 and #5 REBAR. Will not rust or corrode, helps prevent electrolysis. Eliminates tie wire. Dual clamping feature, allows overlapping of REBAR. Holds 2 pieces of REBAR. Recommended spacing of 4 ft...
$51.63
MFG: REBAR STAKES
Model No: PRC-312
Holds #3, #4 and #5 REBAR. Will not rust or corrode, helps prevent electrolysis. Eliminates tie wire. Dual clamping feature, allows overlapping of REBAR. Holds 3 pieces of REBAR. Note: Recommended spacing 4 ft...
$70.88
MFG: ADHESIVES TECHNOLOGY
Model No: T3438CK
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge...
$13.48
Out Of Stock
Out Of Stock
Out Of Stock
MFG: CMC STEEL - SOUTHERN POST
Model No: PIN03N024
Reinforced bar, commonly used in concrete and masonry structures...
$1.60
MFG: CMC STEEL - SOUTHERN POST
Model No: PIN03NO18
Reinforced bar, commonly used in concrete and masonry structures...
$1.24
MFG: CMC STEEL - SOUTHERN POST
Model No: PIN04N018
Reinforced bar, commonly used in concrete and masonry structures...
$2.04
MFG: CMC STEEL - SOUTHERN POST
Model No: PIN04N024
Reinforced bar, commonly used in concrete and masonry structures...
$4.28
Out Of Stock
MFG: CMC STEEL - SOUTHERN POST
Model No: PIN04ZB24
Reinforced bar, commonly used in concrete and masonry structures. Graded 420 (Grade 60) as per ASTM A-6163...
$2.56
MFG: DEACERO
Model No: 5689/71572
Center hole (semi-square with round corners) enables roll to be quickly reversed for right or left hand use. Roll slips quickly onto the reel, yet easily rewinds. Continuous rolls and uniform diameters. Ideal to tie rods. Meets ASTM-A-853. 16.5 ga. 3.5 lb coil...
$11.41
Out Of Stock
Out Of Stock
Out Of Stock
MFG: T.J. HARRIS CO
Model No: 911
The Hercules rebar chair #911 is perfect for floors, sidewalks, driveways and many other concrete applications that require 4 to 5 in concrete slabs. Designed for #4 rebar, the #911 has 1-1/2 in clearance from the ground to the bottom bar. Simply snap the rebar into place. No wire tying is necessary..
$36.67
Out Of Stock
MFG: T.J. HARRIS CO
Model No: 912
The Hercules rebar chair #912 is perfect for commercial concrete applications that require 6 to 8 in concrete slabs. Designed for #4 and #5 rebar, the #912 has a 3 in clearance from the ground to the bottom bar. Simply snap the rebar into place. No wire tying is necessary. Designed for maximum concr..
$87.23
Out Of Stock
MFG: T.J. HARRIS CO
Model No: 924
The #924 Hercules three-bar footer stand is designed for three-bar applications using #4 and #5 rebar. Each bar is positioned 5 in apart with a 3 in clearance from the ground. Simply snap the rebar into place. No wire tying is necessary. The #924 is strong and will not collapse during the pour. The ..
$70.19
Out Of Stock
MFG: T.J. HARRIS CO
Model No: 928
The #928 Hercules two-bar footer stand is designed for two-bar applications using #4 and #5 rebar. Each bar is positioned 5 in apart with a 3 in clearance from the ground. The #928 is strong and will not collapse during the pour. Simply snap the rebar into place. No wire tying is necessary. The reba..
$78.52
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock