For bit key mortise locks. Adjustable tab for non-handed installation. Best used with older style locks. Includes 1 strike and 1 set of installation screws...
Defender Security Deadbolt Strike Plate, Steel, Satin Nickel, 3-5/8 in L, 1-1/4 in W, Suitable for: Entry Door Deadbolts, Includes: Strike with (2) #8 x 1 in and (2) #8 x 3 in Phillips Drywall Screws..
Standard T-strike, used on wood or metal jambs with most grade 2 locksets. Includes one strike with two #8 x 1 in Phillips flat head combination screws...
Defender Security Latch Strike, Steel, Chrome, 2-1/4 in L, 1-7/16 in W, 15/32 in Thick, Hole to Hole: 1-5/8 in, For: All Standard Residential Door Ways..
Defender Security Door Strike Plate, Brass, Polished, 2-3/4 in L, 1-1/8 in W, Hole to Hole: 2-1/8 in, Suitable for: Grade I or Grade II Lockset and Schlage Latches, Includes: (1) Strike with (2) #8 x 1 in Phillips Flat Head Combination Screws, Mounting Screw..
Heavy steel latch guard for out-swinging doors. Four door bolts and raised center dome for strike lip clearance. Includes four 5/16 in x 2 in carriage bolts, washers and cap nuts...
Slide bolt surface mounts to face of door. Two keepers allow for surface or mortise frame installation. Includes one 1-1/4 in surface keeper and one 9/16 in x 1-5/8 in mortise keeper. Prefix U on factory number denotes new Defender Security packaging...
Slide bolt surface mounts to face of door. Two keepers allow for surface or mortise frame installation. Includes one 1-1/4 in surface keeper and one 9/16 in x 1-5/8 in mortise keeper. Prefix U on factory number denotes new Defender Security packaging...
Plated heavy metal casting secures door while allowing 2 in of viewing or ventilation. Includes swing loop keeper, bar lock and installation screws. 3-7/8 in bar length. Prefix U on factory number denotes new Defender Security packaging...
Plated heavy metal casting secures door while allowing 2 in of viewing or ventilation. Includes swing loop keeper, bar lock and installation screws. 3-7/8 in bar length. Prefix U on factory number denotes new Defender Security packaging...
Defender Security Door Viewer, Viewing Angle: 130 deg, Brass, Satin Nickel, Door Thickness: 1-3/4 to 2-3/8 in, Mounting Hole Diameter: 1 in, 15/16 in Dia, Suitable for: 1-3/4 to 2-3/8 in THK Wood/Metal Doors..
160 deg viewer. Solid brass housing and glass UL listed lenses. 15/32 in bore diameter. Fits 1-3/8 to 2 in thick wood or metal doors. Includes 1 viewer...
Fits 5-1/2 in and 6 in hole spacing's on dead latch and deadbolt. Uses six 3 in screws that install on the vertical side of the strike closest to the stop molding. These 3 in screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins...
This high security door lock is a spring-loaded reinforcement lock that protects against unauthorized entry by preventing lock bumping and lock picking while in the locked position. This lock is designed to withstand 800 lb of force and cannot be opened from the outside...
This jamb repair and reinforcement kit is constructed of steel components and comes in a white, paintable powder-coated finish. It features six easy-2-install section plates and two door edge guards and it comes complete with fasteners and step-by-step in...
Supplied with 3 in long wood screws to allow additional security by fastening thru jamb into 2 x 4 outer door framing. Replaces standard strikes and provides improved security...
Supplied with 3 in long wood screws to allow additional security by fastening thru jamb into 2 x 4 outer door framing. Replaces standard strikes and provides improved security...
Supplied with 3 in long wood screws to allow additional security by fastening thru jamb into 2 x 4 outer door framing. Replaces standard strikes and provides improved security...
Plated steel strike is supplied with 3 in long wood screws to allow additional security, by fastening thru jamb into 2 x 4 outer door framing. 1-5/8 in W x 11 in H. Spacing between deadbolt opening and latch opening of 3-5/8 in...
Supplied with 3 in long wood screws to allow additional security by fastening thru jamb into 2 x 4 outer door framing. Replaces standard strikes and provides improved security...
Plated steel strike is supplied with 3 in long wood screws to allow additional security, by fastening thru jamb into 2 x 4 outer door framing. 1-5/8 in W x 11 in H. Spacing between deadbolt opening and latch opening of 3-5/8 in...
For both in swinging and out swinging doors. Protects against pry bar and other forms of forced entry. Inswing application will require some mortising to jamb...
Standard commercial 4-7/8 in strike. Used on wood or metal jambs with most grade 1 locksets. Fits standard ASA cutout. Includes 1 strike with two #12-24 x 1 in Phillips flat head combination screws...
Adjustability provides snug fit of door to jamb. Stops rattle and ensures engagement of dead latch function. May be used on residential or commercial frames. Adjustability provides snug fit of door to jamb. Stops rattle and ensures engagement of dead latch...
Defender Security Latch Guard, Steel, Gray, 11 in H, 3 in W, Suitable for: 3 in Rosettes, Includes: Painted or Plated Shield, (2) or (4) 5/16 in x 2 in Carriage Bolts, Washers and Cap Nuts..
Use on out-swinging doors with 2-3/8 in standard residential backset. Protects against forced entry. Includes 1 shield, 2 carriage bolts and 2 cap nuts and washers...
2-Piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of one-way sheet metal screws and 1 set of pan head screws for metal doors...
2-Piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of one-way sheet metal screws and 1 set of pan head screws for metal doors...
Covers marred doors and allow conversion of 2-3/8 to 2-3/4 in backset or 2-3/4 to 2-3/8 in. Inside diameter of 2-1/8 in, outside diameter of 3-1/2 in. Includes 2 plated covers...
Covers marred doors and allow conversion of 2-3/8 to 2-3/4 in backset or 2-3/4 to 2-3/8 in. Inside diameter of 2-1/8 in, outside diameter of 3-1/2 in. Includes 2 plated covers...
Defender Security Hole Filler Plate, Steel, Chrome, Dimensions: 2-5/8 in Dia, Suitable for: 1-3/4 in Thick Doors, Includes: (2) Painted or Plated Covers, (1) #10 x 1 in, (1) #10 x 1-1/2 in Machine Screw..
Screws at base of box strike secure to 2 in x 4 in framing for added security. Some mortising required. Screws at base of box strike secure to 2 in x 4 in framing for added security...
Reinforces and repairs doors. Assists in preventing forced entry. Use on wood or metal doors with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts...