PRIME LINE PRODUCTS

193669 STANDARD MIRROR CLIP 1/..

193670 STANDARD MIRROR CLP 1/4..

193674 SPRG LDD MRR HNGR CLP C..

193676 MODERN MIRR CLIP 1/8IN..

CLIP RETAIN SCREEN TOP/BTM BLK..

HANDLE SCRN DR BAY GLD..

PULL SCRN DR MTL CHRM 1/PK..

A161 SLDNG SCRN DR ST D CASE..

A177 SLD SCREEN DOOR HANDLE..

DOOR LATCH STRIKE/GUIDE ADJ ST..

The TH 22007 is a die-cast casement operator crank handle with a baked enamel white finish and a matching plastic swivel knob. It fits the Truth 11/32 in operator spindles only...

TH 22142 is a die-cast white tee handle that fits 11/32 in spindles found on Truth brand operators only. Ideal for low-profile situations where the normal crank handle interferes with the window blinds and more. The snap-on design make it extremely easy to install. No set screw required...

TH 22253 is a folding crank handle that fits onto Truth casement operators. It is die-cast with a baked enamel white finish. It offers an exceptionally low-profile when folded yet requires far less torque to operate than traditional low-profile handles...

Replacing the old Truth EntryGard Series the TH 23028 is a left handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plast..

Replacing the old Truth EntryGard Series the TH 23031 is a right handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plas..

TH 23076 is a left handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optiona..

The TH 23098 is a left handed casement window sash lock. It is white painted die-cast zinc construction. Mounting holes are 2-3/8 in apart. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping...

The TH 23099 is a right handed casement window sash lock. It is white painted die-cast zinc construction. Mounting holes are 2-3/8 in apart. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping...

TH 24000 is a matching combination cover in plastic and a matching die-cast crank, both in a bronze finish. Both cover and crank are specifically used on the Truth EntryGard dual arm operators TH 23076 through TH 23079...

TH 24002 is a matching combination cover in plastic and a matching die-cast crank, both in a white finish. Both cover and crank are specifically used on the EntryGard dual arm operators TH 23076 through TH 23079...

The TH 23056 is a casement window sash lock that offers a low-profile. It only requires a 5/8 in stop thickness. It is white painted die-cast zinc construction. Mounting holes are 2 in apart. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the ..

High-pressure, corrosive-resistant die-cast zinc, baked enamel finish, white, concealed locking mechanism pulls rails together helping to reduce air infiltration, alignment lugs prevent side shift of the sash, slim-line design for narrow rail application, lower profile allows maximum sash opening...

PATIO DOOR SCRN RLR 7/8DX1/4W..

PATIO DOOR SCRN RLR STEEL 1IN..

ROLLER DR SCRN WHT METAL 2/PK..

B622 SLIDING DR ROLLER ASSM..

WEATHERSTRIP GARAGE DR 16FT BL..

PATIO DOOR ROLLER ASSY 1-1/8..

Defender Security Deadbolt Strike Plate, Steel, Antique Brass, 3-5/8 in L, 1-1/4 in W, Suitable for: Standard Strikes, Includes: Strike with (2) #8 x 1 in and (2) #8 x 3 in Phillips Drywall Screws..

Defender Security Lockset, Design: Mortise, Backset Size: 2-3/8 in, Key Type: Keyed, Skeleton, Steel, Polished Brass, Dimensions: 4 in L x 2-1/4 in W x 7/8 in D, Includes: (1) Mortise Caselock Assembly, (2) Knobs, (2) Trim Plates Strike Plate, Mounting Screw..

Defender Security T-Strike Plate, Stainless Steel, 2-3/4 in L, 1-1/8 in W, Hole to Hole: 2-1/8 in, Suitable for: Grade I or Grade II Lockset and Schlage Latches, Includes: (1) Strike with (2) #8 x 1 in Phillips Flat Head Combination Screws..

Defender Security Deadbolt Strike Plate, Steel, Satin Nickel, 3-5/8 in L, 1-1/4 in W, Suitable for: Entry Door Deadbolts, Includes: Strike with (2) #8 x 1 in and (2) #8 x 3 in Phillips Drywall Screws..