Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - #8 sheet metal screws for 3/16 in and smaller offsets, #10-24 machine screws for 5/16 in and larger...
Use to attach screen to window opening. Includes 12 clips and Phillips pan-head - #8 sheet metal screws for 3/16 in and smaller offsets, #10-24 machine screws for 5/16 in and larger...
Fits a 5 mm Dia hole (3/16 in). Has plastic seat with metal peg provides added strength. Metrically sized for most imported cabinet and bookshelves. 15 lb maximum safe load per peg...
Fits a 5 mm Dia hole (3/16 in). Has plastic seat with metal peg provides added strength. Metrically sized for most imported cabinet and bookshelves. 15 lb maximum safe load per peg...
This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting ho..
This sliding screen door handle and latch is non-handed and used on 1/2 in thick Columbia doors as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, ..
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H...
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch...
Non-handed, mortise installation, fits on Academy, Better-Bilt and other door manufacturers. 2 in wide and 3 in between screw holes. Contains one plastic inside and outside pull, one steel latch assembly, one die-cast strike, installation screws...
These screen shields provide protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handleset that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money & extends th..
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws...
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles..
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1..
This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to eng..
This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside lat..
This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slide..
This sliding screen door handle and latch is non-handed and used on 1/2 in extruded and roll-formed doors. The handle has 3 in mounting holes. The steel latch is 2-13/16 in long with a 1/2 in projection and slides up and down to engage the keeper A 148 or A 162. It is used by aluminite as well as ot..
This sliding screen door handle and latch is non-handed and used by several manufacturer's of hat section style doors. It contains an inside pull, outside pull and steel latch. The black plastic handles have mounting holes of 3 in. The latch is 3-11/16 in long with a 1-7/16 in projection and slides ..
Non-handed, black plastic inside and outside pulls, steel latch hook, steel keeper, vinyl top guides, for 1/2 in thick Columbia Series 4000 screen doors...
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring...
Extruded aluminum housing, with steel spring; adjustable wheel with center groove. Fits on International Series 900, 925, 950 doors. Contents: 2 roller assemblies; installation screws...
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw...
This center grooved sliding screen door tension roller is used by many patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 in steel ball bearing roller. The tension spring 2-1/2 in L and is a heat-treated high tension steel spring...
This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 in high density polyethylene roller and is used on the top or the bottom. Easy to install by insert..
This sliding screen door roller assembly insert has an aluminum frame with a high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the co..
This top hung roller assembly is used on Fullview doors as well as other patio door manufacturer's doors. The bracket is a flat stamped steel bracket with slotted mounting holes that allow it to be adjusted o the correct height when re-installing the screen door onto the upper track. The roller is a..
This Arcadia style roller assembly was used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in high density polyethylene roller and ..
This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. The guide roller is a 11/16 in oval ball bearing high density polyethylene roller...
This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller inside. It fits into a rectangle slot in the bottom of the door and is held in by the included screw...
This is a roller is used on bottom mount installations. It is a 1 in steel ball bearing roller with a 1/4 in axle hole. The 1/4-20 x 3/4 in carriage bolt inserts through the screen door frame and through the roller and is then secured in the bottom rail with a nut...
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors...
It is die-cast with an adjustment screw that would adjust the B 515 style roller that has been installed onto the corner's roller pivot arms. The die-cast corner fits into the sliding screen door frame holding the bottom or top rails and the side stiles together...
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend)...
This is a tension spring roller assembly with a V shaped spring design is used by several patio door manufacturers. The roller is a 1 in steel ball bearing roller with a heat-treated steel tension spring that is V shaped. The 2 in L V shaped flat spring inserts into the screen frame giving tension r..
This sliding screen door roller assembly insert has a high density polyethylene frame with an adjustable high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door by snapping it into place. The roller housing ..
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw...
This sliding screen door corner assembly is used on Jim Walters Doors and several other manufacturers. It is an all-in-one corner and roller combination. It is made of stamped aluminum with an adjustment screw and center grooved spring activated high density polyethylene roller attached at the end o..
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw...
This Arcadia style roller assembly is used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in steel ball bearing roller and fits ont..