HITACHI POWER TOOLS

The DH40MC 1-9/16 in SDS Max rotary hammer is designed to take on a variety of tasks including drilling holes in a concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. This powerful 10 A motor produces 6.3 ft-lb of impact energy and del..

The EC2510E 8 gal gas-powered wheeled air compressor combines contractor-grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 psi to a maximum of 145 psi so it turns on well before tools requirements are compromised...

The EC99S twin stack compressor features an oil-lubricated cast iron pump and 15 A direct drive induction motor for longer life. The motor is protected by a thermal overload protection that stops the motor in a possible overheating situation. Weighing just 52.9 lb, the EC99S has an ergonomic carryin..

New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 deg adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Weighs 2.2 lb, dimension of 10-11/32 in L x 2-3/8 in W x 9-1/8 in H. Air pressu..

The standard crown stapler is used for construction work such as wall sheathing, roof decking, subfloor installation, mobile and modular home construction and assembling wooden crates and expendable pallets. The standard crown stapler fires 16 ga 7/16 in crown staples from 1 to 2 in length and featu..

Quick clear jam release, tool-less depth adjustment. Rubber grip for comfortable handling. Plastic magazine with stainless plate. Dimension of 14-3/8 in L x 9-13/16 in H x 3-11/32 in W. Operating pressure is 70 to 120 psi, air Inlet is 3/8 in NPT thread, magazine capacity is 150 staples and adhesive..

Metabo HPT's NP35A micro pin nailer drives 23 ga headless pin nails, which produce nearly invisible holes. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly...

The NR1890DC 18 V cordless paper strip framing nailer completely raises the bar for cordless framing nailers. It is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT HPT's unique air spring drive system that delivers similar p..

Metabo HPT Strip Framing Nailer, Tool Only/Battery Included: Battery Included, Battery Voltage: 18 V, Battery Capacity: 3 Ah, Magazine Capacity: 47, Collation Angle: 21 deg, Collation Type: Plastic, Fastener Type: Nail, Fastener Size: 2 to 3-1/5 in L, Includes: Case, Charger and Battery, Battery Typ..

The NR83A5 full round head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5 is like the original NR83A that you have come to..

The NR83AA5 paper collated framing nailer is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83AA5 is like the original NR83A that you have come to trust, but now with ..

Great 3-1/2 in 30 deg paper collated framing nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction. The lightweight Paper Collated Framing Nailer weighs only 7 lb, making it easy to use all day, while still providing the power of bulkier, heavier nail..

The NR90AE(S1) framing nailer drives plastic collated nails from 2 in up to 3-1/2 in length and features Metabo HPT's next generation "industrial design." Weighing only 7.5 lb, it is easy-to-use all day, while still providing the power as other bulkier and heavier framing nailers. It can be used for..

The NT50AE2 2 in 18 ga Brad Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8 in in length up to 2 in...

The NT65M2(S) 16 ga finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing moulding, chair rail, cabinetry and other fine finish applications. The NT65M2(S) accepts 16 ga finish nails in lengths ranging from 1 in u..

The NT65MA4 15 ga angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster cle..

Tool-less depth of drive adjustment for precision nailing/flush driving. Carbide tipped push lever reduces wear. Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions. 16 deg magazine angle, contact actuation, 3/8 in sequent..

The coil siding nailer offers the precision, power and features pros demands for applying siding, sheathing, decking and fencing. The first nail gun, using air pressure to propel a nail, was first introduced in the 1950s to increase the speed of sheathing and sub-floors for house construction. These..

The NV83A5 round head coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants and for other types of general packing and crating wo..

The NV90AG(S) framing nailer drives wire collated nails from 1-3/4 in up to 3-1/2 in length and features Hitachi's next generation industrial design. The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.7 lb, it is ..

The NR65AK2 Strap-Tite® strip nailer accepts 1-1/2 in and 2-1/2 in fasteners while offering great precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement...

The NR65AK2 Strap-Tite® strip nailer accepts 1-1/2 in and 2-1/2 in fasteners while offering great precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement...

NAILER FRMG PLST STRP 3-1/4IN..