DRIP FITTINGS

Rain Bird Drip Irrigation Adapter, 1/2 in Connection, Male x Barb Connection, PVC, Brown, 0 to 60 psi..

Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing...

Connect 2 pieces of 1/2 in tubing...

Connect 2 pieces of 1/2 in tubing in an "L" shape...

Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing...

Connect 3 pieces of 1/2 in tubing in a "T" shape...

The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system...

Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing..

Rain Bird Hose Adapter, 3/4 in Nominal, FHT x Tube Connection, 70 psi Pressure, Plastic, Black, Suitable for: 1/2 to 5/8 in Tubing..

Rain Bird Spiked Tee, Easy-Fit, Universal, 1/2 in Connection, FPT Connection, Plastic, Black, 30 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing..

Compression fitting for use with all 1/2 in drip tubing brands...

Compression fitting for use with all 1/2 in drip tubing brands...

Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing..

Universal compression fitting tee for use with all 1/2 in drip tubing brands...

Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing..

For outdoor faucet or hose. Includes backflow preventer, 150 mesh filter (pre-installed inside backflow preventer) and 25 psi regulator. Multi-function kit ensures proper operation of your drip irrigation system...

Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components..

Convert an 1800® spray head or a riser to a drip zone. This all-in-one unit includes a 200 mesh filter and 30 psi pressure regulator for proper operation of a drip irrigation system...

Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively...

Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing...

Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily...

Used to shut-off the end of 1/4 in tubing. Removes easily...

Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi...

Compression tees made from ABS. For water pressure up to 60 psi...

Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi...

Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi...

Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi...

Double barbed design allows water pressure up to 50 psi...

For water pressure up to 60 psi. Ends are color-coded for easy size identification...

3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring...

3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring...