NICHOLSON

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is bet..

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is bet..

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is bet..

File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 in to 0...

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces...

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces...

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is perfect for use on concave, convex and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes wit..

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point...

Plain horse rasps are double-ended with rasp teeth on one side, file teeth on opposite side, rectangular shape. Thin fine-toothed rasp for shoeing racetrack, riding horses and ponies...

Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut® file pattern that are narrow chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, rectangular shape, tooth cuts deeper to last ..

Half round shape and has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic...

For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers...

Single cut file teeth on edge for use on wood and soft metals. Used by woodworkers, hobbyists and plumbers...

File card and brush. Especially for use on finer cut files...

Interchangeable cushion inserts designed to fit most popular files. Handle made of strong high-impact material. Contoured to fit hand for straight, lathe and draw filing. Non-slip textured finish for easier grip. Includes four inserts...

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. Two square edges allow you to make grooves fixed at the same width as the file and all sizes tap..

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals...

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point...

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point...

Crescent Nicholson File, Profile Shape: Round, Pattern Type: American Mill, Cut Type: Bastard, Single, Edge Type: Smooth, 10 in OAL..

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is ideal for use on concave, convex and flat surfaces. The two-sided files are rounded on one side and flat on the other, so you can round out holes wit..

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces...

Half round shape and has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic...

The Crescent Nicholson flat double/single-cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smoot..

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point...

The Crescent Nicholson triangle single-cut extra slim taper files with American pattern are perfect for filing gullets between saw teeth. The triangular shape makes accessing tight internal angles and squaring corners a breeze and the single-cut construction effortlessly smooths the edges of sheet m..

Crescent Nicholson File, Pattern Type: American Taper, 6 in L Blade..