TOOLPRO

Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment...

Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste...

Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment...

Toolpro Sure Corner Drywall Corner Tape, Paper/Steel, 100 ft L, 2 in W..

Toolpro Mesh Tape, Self-Adhesive, 300 ft L, 1-7/8 in W, Fiberglass, White..

Toolpro Mesh Tape, Self-Adhesive, 300 ft L, 1-7/8 in W, Fiberglass, Yellow..

Toolpro 4 x 4 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick, economical and simple to perform. The galvanize..

Toolpro 6 x 6 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick, economical and simple to perform. The galvanize..

Toolpro 8 x 8 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick, economical and simple to perform. The galvanize..

This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver...

Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finis..

This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material steady. The tool's thin..

The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by..