Out Of Stock
MFG: Watts
Model No: 0190128
Used in residential applications to protect against excessive pressure on tankless water heaters and domestic storage tanks. It consists of a bronze body construction with 1/2 in NPT threaded male inlet and 1/2 in NPT threaded female (drain) outlet connections, test lever and stainless steel spring...
$20.54
Out Of Stock
MFG: Watts
Model No: 0371271
This 1/2 in calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil or air. It consists of a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet con..
$75.20
MFG: Watts
Model No: 0950001
This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system ..
$133.89
MFG: Watts
Model No: 0950053
Specially made for smaller supply lines and ideally suited for laboratory equipment, processing tanks, sterilizers, dairy equipment and similar applications. It is particularly recommended for boiler feed lines to prevent backflow when supply pressure falls below system pressure. Suitable for use on..
$121.10
Out Of Stock
MFG: Watts
Model No: 0951566
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a forged body with NPT male inlet and NPT female outlet connections, unique thermostat with special ..
$28.60
Out Of Stock
MFG: Watts
Model No: 0960002
Designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature ..
$270.78
Out Of Stock
MFG: Watts
Model No: 0960159
This 3/4 in lead-free hot water control valve is designed for installation on water heating equipment to provide tempered water to point of use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response to water temp..
$98.25
MFG: Watts
Model No: 1 LFN45BM1-U
Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and servicea..
$200.42
Out Of Stock
MFG: Watts
Model No: 0066100
Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Model 100XL-8 is..
$29.40
MFG: Watts
Model No: 100XL-125
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special the..
$38.11
MFG: Watts
Model No: 100XL-150
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special the..
$37.13
MFG: Watts
Model No: 100XL-8-125
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special the..
$25.72
MFG: Watts
Model No: 100XL-8-150
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special the..
$29.41
MFG: Watts
Model No: SB1156F
This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system ..
$116.14
Out Of Stock
MFG: Watts
Model No: 0004494
Designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 Btu/hr. This two in one relief valve provides the most proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It feature..
$39.64
MFG: Watts
Model No: 3/4 LF1170M2-UT
This 3/4 in lead-free hot water control valve is designed for installation on water heating equipment to provide tempered water to point-of-use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response to water temp..
$177.39
MFG: Watts
Model No: 3/4 LFN45BM1-U
Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and servicea..
$108.74
MFG: Watts
Model No: 3/4X3/4 LF7RU2-2
This 3/4 by 3/4 in lead-free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead-free brass body construction, with two plastic replaceable check valves and stainless ..
$79.68
MFG: Watts
Model No: 3501-0808/P-412
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$5.58
MFG: Watts
Model No: 3501-1008/P-610
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$6.02
MFG: Watts
Model No: 3501-1012/P-613
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$7.14
MFG: Watts
Model No: 3501-1014/P-614C
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$7.06
MFG: Watts
Model No: 3501-1412/P-810
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$8.28
MFG: Watts
Model No: 3501-1816/P-1010
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$14.14
MFG: Watts
Model No: 3510-1008/P-615
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$7.86
MFG: Watts
Model No: 3510-1012/P-617
Watts 35 Series 3510-1012 Connector, 1/2 x 3/4 in, CTS x NPS x Female, Polysulfide, 250 psi Pressure
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$13.12
MFG: Watts
Model No: 3510-1013/P-616
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$12.92
MFG: Watts
Model No: 3510-1412/P-815
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$13.84
MFG: Watts
Model No: 3510-1416
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing...
$15.18
MFG: Watts
Model No: 3510-1816/P-1015
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$14.86
MFG: Watts
Model No: 3514-1008/P-606
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$5.40
MFG: Watts
Model No: 3514-1410/P-806
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$6.10
MFG: Watts
Model No: 3514-1814/P-1019
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$5.64
MFG: Watts
Model No: 3527-1008/P-604
Plastic male stem fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installati..
$4.13
MFG: Watts
Model No: 3528-1008/P-605
Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble-free service. Produced of off-white Polysulfone, a high-performance thermal plastic material, the design allows for quick and easy connections without the use o..
$4.96
MFG: Watts
Model No: 3515-08/P-400
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures..
$7.56
MFG: Watts
Model No: 3515-10/P-600
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures..
$8.24
MFG: Watts
Model No: 3515R-1004/P-601
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures..
$9.96
MFG: Watts
Model No: 3515R-1008/P-602
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures..
$7.70
MFG: Watts
Model No: 3515R-1410/P-801
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures..
$10.46
MFG: Watts
Model No: 3517-08/P-420
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools a..
$7.24
MFG: Watts
Model No: 3517-10/P-620
This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools a..
$8.40
MFG: Watts
Model No: 3517-18/P-1020
This 1 in CTS quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybut..
$13.58
MFG: Watts
Model No: 3518-10/P-636
This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installati..
$6.32
MFG: Watts
Model No: 3518-14/P-836
This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/4 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installati..
$9.80
MFG: Watts
Model No: 3518B-18
Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools...
$18.88
MFG: Watts
Model No: 3519-1006/P-631
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/8 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of in..
$9.62
MFG: Watts
Model No: 3519-1008/P-630
This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of in..
$6.64
MFG: Watts
Model No: 3519B-1816
This 1 CTS x 1 in NPT plastic male elbow fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections withou..
$19.30