BYPASS DOOR HARDWARE

This wardrobe door bumper by Prime-Line Products is constructed of a durable steel bracket and a cushioning, gray rubber bumper. It is easy to install and comes with the necessary fasteners to make mounting a breeze. It is recommended that pilot holes be pre-drilled prior to mounting, to avoid split..

Top hung; side mount. Offset adjustable steel bracket. Round edge nylon wheels. Fits 3/4 to 1-3/8 in thick door; fits on Acme. Contents: 2 roller assemblies, 6 #8 x 3/4 in Phillips pan head sheet metal screws...

Top hung, side mount. Offset adjustable steel bracket. Round edge nylon wheels. Fits 3/4 to 1-3/8 in thick door, fits on Acme. Includes 2 roller assemblies, 6# 8 x 3/4 in Phillips pan head sheet metal screws...

Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws...

Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws...

Top-center mounting; adjustable steel bracket; flat edge nylon wheel; fits 3/4 to 1-3/8 in thick door. Contents: 1 roller assembly...

Single wheel; adjustable steel bracket; also acts as a corner bracket for steel frame by-passing doors; fits on Acme. Contents: 2 roller assemblies, 1 left and 1 right...

Single wheel; adjustable steel bracket; also acts as corner bracket for steel frame by-passing door; fits on Acme. Contents: 2 roller assemblies...

N 6558 is a set of nylon guides used on Glide-All bi-pass wardrobe door systems. They mount onto the back bottom frame section of steel panel style doors and extend into the bottom floor mounted track system...

N 6559 is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors & are held in place by a screw. Used on Glide-All door systems...

Nylon ball bearing wheel, adjustable steel housing assembly. Fits on Marshall door. Includes 1 roller assembly...

Nylon ball bearing wheel; with adjustable aluminum housing bracket; bracket has "T" shaped extruded boss. Fits on: Contractors Mirror Door company. Contents: 1 roller assembly...

Prime-Line Roller Assembly, 40 lb Weight, Number of Rollers: 1, Bearing Type: Ball, Roller Edge Type: Concave, Roller Width: 5/16 in, Roller Diameter: 1-1/2 in, Aluminum, Silver, Unfinished, Bottom Mounting, Dimensions: 1-3/4 in L x 1/2 in W x 3 in H, Suitable for: Monarch 500 Series Aluminum Frame ..

Single wheel; adjustable steel bracket; round edge nylon wheel; designed for steel frame bi-passing doors. Fits on: Cox. Contents: 2 roller assemblies, non-handed...

N 6624 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The tab on the back end of the housing allows a screw to hold it in place while the adjusting screw can be..

N 6625 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The tab on the back end of the housing allows a screw to hold it in place while the adjusting screw can be..

N 6630 is a Paneled Mirror Door roller assembly with a concave nylon roller. Used on Monarch Mirror Doors "L" Series, the grooved ball bearing nylon roller provides a smooth ride as it slide back and forth. The flat nylon roller is 1-1/2 in Dia. Note that the adjusting screw is centered on the top o..

N 6686 is a 1-3/16 in concave steel ball bearing roller assembly that installs into a 1/2 in deep by 2-15/16 in long mortised pocket on each end of the solid wood closet door bottom rail. The roller assembly is held in place by two 3/4 in long screws. The bracket is stamped steel with a 1-3/16 in st..

Plated steel, includes two brass nails for installation...

N 6790 is a stamped steel housing with a 1-7/16 in nylon roller attached used on Acme mirrored doors. The tabs on the side insert into a slot in the door frame and is locked in by the offset tabs installing into the same slot. To remove, just insert a thin screwdriver or knife to align the lower tab..

N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. If a shim is needed see N 6795 carpet riser to accomm..

N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some cases, to make this part work the lower tabs may need to be trimmed off. Never remove the upper tabs n..

Brass plated steel sliding door pull for pocket doors; fits a 7/8 x 2-1/2 in mortise. Contents 2 pulls, 4 nails or screws...

N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in thick doors. Originally used by Excellent Door...

N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors...

Plated steel, includes two brass nails for installation...

N 6870 is a paneled mirror door roller assembly with a concave nylon roller. Used on contractor's mirror doors, the grooved nylon roller rides on a track. The concave nylon roller is 1-1/2 in Dia. Note that the adjusting screw is centered on the top of the housing and the tabs on either side will in..