POCKET DOOR HARDWARE

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed...

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed...

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed...

Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 84-1/2 in, Wood, Suitable for: 6 ft 8 in Door..

Marwin Pocket Door Frame, Weight Per Door: 200 lb, Door Thickness: 1 to 1-3/4 in, Rough Opening Size: 100-1/2 in, Wood, Suitable for: 8 ft Door..

National Hardware Pocket Door Hardware, Door Thickness: 3/4 to 1-3/4 in, Aluminum/Particle Board/Steel, Includes: (1) Header and Track Assembly, (4) Jamb Stiffeners, (2) Floor Brackets, (1) Door Guide Set, (2) Snap-in Door Plates, (2) Snap-in Hangers, (1) Bumper, (1) Wrench..

National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly..

Fits doors from 1-1/4 in to 1-5/8 in thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance...

Solid brass faceplate. (2-1/2 in L x 2-11/16 in W). Adjustable for 1-3/8 in or 1-3/4 in doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die-cast finger pull. Inner working construction eliminates jamming of lock...

National Hardware V1951 Privacy, Brass, Chrome, Suitable for: 1-3/8 in THK Doors..

Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners...

Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners...

Used on pre-drilled pocket doors. Locks the pocket door. Easy installation. Includes fasteners...

N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back an..

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that mak..

N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed...

N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod. The threaded rod catches into a bracket..

N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to si..

N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This roller rides in a double "J" track..

N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick...

N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed...

N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing th..

RENIN Soft Close/Open Kit, Maximum Weight per Door: 88 lb, Suitable for: Pocket Door..

72 in aluminum extruded track with hardware for hanging a pocket door...