Replaces patio door handle/latch set. Fits 1 to 1-1/4 in patio doors. 3-15/16 in hole spacing. Includes key for locking mechanism. Aluminum finish and wood handle...
This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting ho..
This sliding screen door handle and latch is non-handed and used on 1/2 in thick Columbia doors as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, ..
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H...
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch...
Non-handed, mortise installation, fits on Academy, Better-Bilt and other door manufacturers. 2 in wide and 3 in between screw holes. Contains one plastic inside and outside pull, one steel latch assembly, one die-cast strike, installation screws...
These screen shields provide protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handleset that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money & extends th..
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws...
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles..
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1..
This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to eng..
This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside lat..
This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slide..
This sliding screen door handle and latch is non-handed and used on 1/2 in extruded and roll-formed doors. The handle has 3 in mounting holes. The steel latch is 2-13/16 in long with a 1/2 in projection and slides up and down to engage the keeper A 148 or A 162. It is used by aluminite as well as ot..
This sliding screen door handle and latch is non-handed and used by several manufacturer's of hat section style doors. It contains an inside pull, outside pull and steel latch. The black plastic handles have mounting holes of 3 in. The latch is 3-11/16 in long with a 1-7/16 in projection and slides ..
Non-handed, black plastic inside and outside pulls, steel latch hook, steel keeper, vinyl top guides, for 1/2 in thick Columbia Series 4000 screen doors...
Extruded aluminum pulls, inside and out. Fixed anti-lift bar for added security. Reversible for right or left hand doors. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper and installation fasteners...
Surface-mounted; no mortising required. Separate lock inserted into base permits instant reversibility. Has a fixed anti-lift key to resist unauthorized entry by outside manipulation. Retracts to unlocked position if the door is closed with the hook extended. Prevents damage to keeper and lock assem..
Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside..
Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside..
Low profile handle height, approximately 1 in, latch hook profile is 7/16 in, allows clearance for blinds and draperies. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper, installation fasteners...
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of..
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock; reversible for left or right hand; complete with 4 different hood lengths. Includes 1 inside latch with deluxe wood pull, 1 outside pull, 1 keeper, installation fasteners, 4 hook assortment and 1 loc..
Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, ..
Extruded aluminum inside pull; clamp-latch with plastic activator; flush extruded aluminum outside pull; designed to fit international doors; latch hook profile is 1/4 in and the projection is 9/16 in. Includes 1 inside pull and latch assemble, 1 outside pull and installation fasteners...
Standard reversible surface mount handle set for left or right handed mortise locking doors. Hook style latch, mortise style handle, extruded aluminum inside pull has wood grain feature strip and a black die-cast outside pull designed to be used with any of the following latching units; E-2008, E-20..
Hook style latch, designed to fit 90% of all internally latched doors, reversible right or left hand openings, complete with keeper, locking unit with key, automatic unlatching options prevents accidental lockout...
Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained soli..
Extruded aluminum inside pull, clamp-latch with metal activator, die-cast outside pull has knock-out for converting to keyed cylinder lock, latch hook profile is 1/4 in, projection is 1/2 in, used by many patio door manufacturers...
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of..
Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by many patio door manufacturers. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 in..
Extruded aluminum inside and die-cast outside pulls; surface-mounted; fixed anti-lift bar for additional security; reversible for left or right hand doors; latch hook profile is 7/16 in. Contents: 1 inside pull and latch assembly; 1 outside pull; 1 face mounting keeper; installation fasteners...
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners...
This unique product is the most versatile locking unit available. It will accommodate 7 different hole spacing patterns from 3 to 6-7/8 in. The 3-15/16 in hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. These holes are offset 1/8 in from th..