LATCHES / HANDLES

HANDLE SCRN DR BAY GLD..

PULL SCRN DR MTL CHRM 1/PK..

A161 SLDNG SCRN DR ST D CASE..

A177 SLD SCREEN DOOR HANDLE..

DOOR LATCH STRIKE/GUIDE ADJ ST..

HANDLE PATIO INT ALUM WD HDL..

This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting ho..

This sliding screen door handle and latch is non-handed and used on 1/2 in thick Columbia doors as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, ..

Non-handed, mortise installation, fits on Academy, Better-Bilt and other door manufacturers. 2 in wide and 3 in between screw holes. Contains one plastic inside and outside pull, one steel latch assembly, one die-cast strike, installation screws...

These screen shields provide protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handleset that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money & extends th..

Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles..

This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to eng..

This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside lat..

This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slide..

This sliding screen door handle and latch is non-handed and used on 1/2 in extruded and roll-formed doors. The handle has 3 in mounting holes. The steel latch is 2-13/16 in long with a 1/2 in projection and slides up and down to engage the keeper A 148 or A 162. It is used by aluminite as well as ot..

This sliding screen door handle and latch is non-handed and used by several manufacturer's of hat section style doors. It contains an inside pull, outside pull and steel latch. The black plastic handles have mounting holes of 3 in. The latch is 3-11/16 in long with a 1-7/16 in projection and slides ..

Non-handed, black plastic inside and outside pulls, steel latch hook, steel keeper, vinyl top guides, for 1/2 in thick Columbia Series 4000 screen doors...

Extruded aluminum pulls, inside and out. Fixed anti-lift bar for added security. Reversible for right or left hand doors. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper and installation fasteners...

Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside..

Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside..

Low profile handle height, approximately 1 in, latch hook profile is 7/16 in, allows clearance for blinds and draperies. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper, installation fasteners...

Handle Set, 3-7/8 in Designed for Ador/HiLite doors; extruded aluminum inside and outside pulls; wood grain feature strip; handle latches into door jamb (no strike necessary). Handle type: Surface-mounted. Latch style: Hook style. Contents: 1 inside pull and latch assembly; 1 outside pull; installat..

Prime-Line Handle Set, Door Thickness: 7/8 to 2-3/8 in, Bolt Hole Diameter: 3/16 in, Aluminum, Aluminum, Gray, Suitable for: Sliding Glass Doors, Includes: (1) Inside Pull and Latch Assembly, (1) Outside Pull, (1) Keeper, Installation Fasteners..

Prime-Line Handle Set, Door Thickness: 1 to 1-1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, Zinc, Zinc/Wood, Suitable for: Sliding Glass Doors, Includes: (1) Inside Pull and Latch Assembly, (1) Outside Pull, Installation Fasteners..

Prime-Line Handle Set, Door Thickness: 1 to 1-1/8 in, Cylinder Size: 1/2 in, Key Type: Different, Bolt Hole Diameter: 0.395 in, Aluminum, Painted, Black, Suitable for: 7/8 in Thick Doors, Includes: (1) Inside Latch, (1) Outside Pull, (1) Locking Cylinder, (4) Hook Assortment, (1) Keeper, Installatio..

Prime-Line Door Pull, 1 in W, Mortise Mounting, Black, Aluminum, Painted, Suitable for: Adam Rite and W and F Mortise Latches, Includes: Hardwares..

Extruded aluminum inside pull; clamp-latch with plastic activator; flush extruded aluminum outside pull; designed to fit international doors; latch hook profile is 1/4 in and the projection is 9/16 in. Includes 1 inside pull and latch assemble, 1 outside pull and installation fasteners...

Standard reversible surface mount handle set for left or right handed mortise locking doors. Hook style latch, mortise style handle, extruded aluminum inside pull has wood grain feature strip and a black die-cast outside pull designed to be used with any of the following latching units; E-2008, E-20..

Extruded aluminum inside pull, clamp-latch with metal activator, die-cast outside pull has knock-out for converting to keyed cylinder lock, latch hook profile is 1/4 in, projection is 1/2 in, used by many patio door manufacturers...

Extruded aluminum inside and die-cast outside pulls; surface-mounted; fixed anti-lift bar for additional security; reversible for left or right hand doors; latch hook profile is 7/16 in. Contents: 1 inside pull and latch assembly; 1 outside pull; 1 face mounting keeper; installation fasteners...

Extruded aluminum inside pull with wood handle; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 7/16 in. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installat..

This unique product is the most versatile locking unit available. It will accommodate 7 different hole spacing patterns from 3 to 6-7/8 in. The 3-15/16 in hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. These holes are offset 1/8 in from th..

High-profile die-cast handle set for mortise locks, hook style latch, non-handed outside pull can be keyed using E 2144 key cylinder adapter kit...